|
VTL TL-2.5
$4,045.50
R.R.P. $4,495.00
VTL P2.5 Phono Stage $1,695.00
(Optional Extra)
|
VTL
preamplifiers are designed to drive any power amplifier,
allowing you to have the most choice possible. VTL
preamplifiers are also designed to be able to drive low
input impedance solid state power amplifier with full
frequency response, allowing you to have the sweet sound
of tubes with the current of solid state. |
|
| |
|
The TL-2.5 all tube
line stage preamplifier is designed for performance -- giving
you music that is direct from the source, in the most realistic,
colorless and truthful way we know how. This preamp is packed
with features to give you the maximum control over all the audio
and video sources in your system. With 6 line inputs, an
optional internally retro-fittable phono stage, two pairs of
outputs, a tape loop, and external processor loop (for home
theater), you can rest assured that this preamp will plug and
play into your existing system in no time at all. Remote volume
control and mute comes standard.
Above all, you'll be
pleasantly surprised when you find out how little the TL2.5
costs. This sturdily built unit, with quality parts, will take
your breath away with its clear, upfront sound. Visit your
nearest dealer and bring one home to listen now. We're confident
that if you're not a member of the VTL family today, you will be
one very soon after that.
See what the experts are
saying about the TL2.5 -- see
reviews
of the TL2.5 below. |
| |
| • |
6 line inputs, 2 pairs of
outputs, 1 record out, 1 tape loop, 1 external processor loop. |
| • |
25 lbs, 19"W x
15"D x 4"H |
|
• |
High current output, pure tube
circuit. |
|
• |
Stiff power supplies for each gain
stage. |
|
• |
6 line inputs (5 with phono), 2 pairs
single ended RCA outputs, 1 tape loop, 1 record output, 1
external processor loop for home theater. |
|
• |
Optional internally retro-fittable
phono stage, with dedicated power supply. |
|
• |
Front panel controls: source selector,
balance, volume, tape, processor, mute/operate, on/off. |
|
• |
Remote volume control and mute. |
|
• |
Auto mute turn-on circuit, utilizing
two color LED. |
|
• |
Relay switching. |
|
• |
Simplest direct circuit path for
purest musical sound and high reliability. |
|
• |
Audiophile quality laser trimmed Alps
volume and Noble balance controls. |
|
• |
High quality VTL gold plated RCA
jacks. |
|
• |
High quality glass fiber circuit board
with heavy copper traces. |
|
• |
Heavy 16 gauge chassis construction,
with well shielded power supplies. |
|
• |
Toroidal power transformers. |
|
• |
Detachable IEC power cord. |
TL-2.5
Preamplifier Data Specifications
| Vacuum
Tube Complement |
2 x 12AU7,
2 x 12AT7 |
| Inputs
|
6 Single
ended Line inputs
2 RCA
Processor / Tape in |
| Outputs
|
2 pairs
Single-ended RCA
2 pairs
Processor / Tape Out |
| Remote
Control Functions |
Volume and
Mute |
| Gain
|
20 dB |
| Output
Impedance |
200 Ohms
|
| Input
Impedance |
20K Ohms
|
| Frequency
response
+ 0 - 3 dB
|
1 Hz -
60KHz |
| Maximum
Output Voltage < 1% THD |
60 Volts |
| Channel
Separation |
> 75 dB @
1KHz |
| Power
Consumption |
100 Watts
|
| Dimensions
(W x D H) |
19 x 14 x
3.75 inches
48.25 x
35.5 x 9.5 cm |
| Weight
|
25 lbs
(11Kg) Fully packed |
TL2.5
Phono Stage
|
|
MM
|
MC
|
| Tube
Complement |
2x12AX7
|
3x12AX7
|
| Gain
|
45 dB
|
58.0dB
|
| Cartridge
load impedance |
47 kOhms
|
500 Ohms
|
| Minimum
Recommended Cartridge Output
|
6 mV
|
0.5 mV
|
| Signal to
Noise Ratio |
85 dB
|
70 dB
|
|
|
